dmesg - Intel Xeon E5-2650 v2

Return To Intel Xeon E5-2650 v2 System Information

microcode: microcode updated early to revision 0x42e, date = 2019-03-14
Linux version 6.1.30-1-lts (linux-lts@archlinux) (gcc (GCC) 13.1.1 20230429, GNU ld (GNU Binutils) 2.40.0) #1 SMP PREEMPT_DYNAMIC Wed, 24 May 2023 17:18:57 +0000
Command line: BOOT_IMAGE=boot/x86_64/vmlinuz archisobasedir=sysresccd archisolabel=RESCUE1001 iomem=relaxed copytoram initrd=boot/intel_ucode.img,boot/amd_ucode.img,boot/x86_64/sysresccd.img
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]:  576, xstate_sizes[2]:  256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
signal: max sigframe size: 1776
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009abff] usable
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000007b80dfff] usable
BIOS-e820: [mem 0x000000007bb9f000-0x000000007bd4bfff] reserved
BIOS-e820: [mem 0x000000007bd4c000-0x000000007c03cfff] ACPI NVS
BIOS-e820: [mem 0x000000007c03d000-0x000000007c7b4fff] reserved
BIOS-e820: [mem 0x000000007c7b5000-0x000000007cc82fff] ACPI NVS
BIOS-e820: [mem 0x000000007cc83000-0x000000007cffffff] reserved
BIOS-e820: [mem 0x0000000080000000-0x000000008fffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed3ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000087fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.8 present.
DMI: To be filled by O.E.M. To be filled by O.E.M./E5-V2.82H, BIOS 4.6.5 01/03/2023
tsc: Fast TSC calibration using PIT
tsc: Detected 2599.887 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x880000 max_arch_pfn = 0x400000000
x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
total RAM covered: 32736M
Found optimal setting for mtrr clean up
 gran_size: 64K 	chunk_size: 64M 	num_reg: 6  	lose cover RAM: 0G
e820: update [mem 0x7e000000-0xffffffff] usable ==> reserved
last_pfn = 0x7b80e max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd9b0-0x000fd9bf]
Using GB pages for direct mapping
RAMDISK: [mem 0x77a9d000-0x7b80dfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F04A0 000024 (v02 ALASKA)
ACPI: XSDT 0x000000007BF5C080 000084 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: FACP 0x000000007BF65AC8 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
ACPI: DSDT 0x000000007BF5C1A0 009922 (v02 ALASKA A M I    00000003 INTL 20051117)
ACPI: FACS 0x000000007C034F80 000040
ACPI: APIC 0x000000007BF65BD8 000138 (v03 ALASKA A M I    01072009 AMI  00010013)
ACPI: FPDT 0x000000007BF65D10 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: FIDT 0x000000007BF65D58 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
ACPI: MCFG 0x000000007BF65DF8 00003C (v01 ALASKA OEMMCFG. 01072009 MSFT 00000097)
ACPI: HPET 0x000000007BF65E38 000038 (v01 ALASKA A M I    01072009 AMI. 00000005)
ACPI: SSDT 0x000000007BF65E70 0CD380 (v02 INTEL  CpuPm    00004000 INTL 20051117)
ACPI: EINJ 0x000000007C0331F0 000130 (v01 AMI    AMI EINJ 00000000      00000000)
ACPI: ERST 0x000000007C033320 000230 (v01 AMIER  AMI ERST 00000000      00000000)
ACPI: HEST 0x000000007C033550 0000A8 (v01 AMI    AMI HEST 00000000      00000000)
ACPI: BERT 0x000000007C0335F8 000030 (v01 AMI    AMI BERT 00000000      00000000)
ACPI: DMAR 0x000000007C033628 0000BC (v01 A M I  OEMDMAR  00000001 INTL 00000001)
ACPI: Reserving FACP table memory at [mem 0x7bf65ac8-0x7bf65bd3]
ACPI: Reserving DSDT table memory at [mem 0x7bf5c1a0-0x7bf65ac1]
ACPI: Reserving FACS table memory at [mem 0x7c034f80-0x7c034fbf]
ACPI: Reserving APIC table memory at [mem 0x7bf65bd8-0x7bf65d0f]
ACPI: Reserving FPDT table memory at [mem 0x7bf65d10-0x7bf65d53]
ACPI: Reserving FIDT table memory at [mem 0x7bf65d58-0x7bf65df3]
ACPI: Reserving MCFG table memory at [mem 0x7bf65df8-0x7bf65e33]
ACPI: Reserving HPET table memory at [mem 0x7bf65e38-0x7bf65e6f]
ACPI: Reserving SSDT table memory at [mem 0x7bf65e70-0x7c0331ef]
ACPI: Reserving EINJ table memory at [mem 0x7c0331f0-0x7c03331f]
ACPI: Reserving ERST table memory at [mem 0x7c033320-0x7c03354f]
ACPI: Reserving HEST table memory at [mem 0x7c033550-0x7c0335f7]
ACPI: Reserving BERT table memory at [mem 0x7c0335f8-0x7c033627]
ACPI: Reserving DMAR table memory at [mem 0x7c033628-0x7c0336e3]
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000087fffffff]
NODE_DATA(0) allocated [mem 0x87fffb000-0x87fffffff]
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
  Normal   [mem 0x0000000100000000-0x000000087fffffff]
  Device   empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x0000000000099fff]
  node   0: [mem 0x0000000000100000-0x000000007b80dfff]
  node   0: [mem 0x0000000100000000-0x000000087fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000087fffffff]
On node 0, zone DMA: 1 pages in unavailable ranges
On node 0, zone DMA: 102 pages in unavailable ranges
On node 0, zone Normal: 18418 pages in unavailable ranges
ACPI: PM-Timer IO Port: 0x408
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
TSC deadline timer available
smpboot: Allowing 16 CPUs, 0 hotplug CPUs
PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: hibernation: Registered nosave memory: [mem 0x0009a000-0x000dffff]
PM: hibernation: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: hibernation: Registered nosave memory: [mem 0x7b80e000-0x7bb9efff]
PM: hibernation: Registered nosave memory: [mem 0x7bb9f000-0x7bd4bfff]
PM: hibernation: Registered nosave memory: [mem 0x7bd4c000-0x7c03cfff]
PM: hibernation: Registered nosave memory: [mem 0x7c03d000-0x7c7b4fff]
PM: hibernation: Registered nosave memory: [mem 0x7c7b5000-0x7cc82fff]
PM: hibernation: Registered nosave memory: [mem 0x7cc83000-0x7cffffff]
PM: hibernation: Registered nosave memory: [mem 0x7d000000-0x7fffffff]
PM: hibernation: Registered nosave memory: [mem 0x80000000-0x8fffffff]
PM: hibernation: Registered nosave memory: [mem 0x90000000-0xfed1bfff]
PM: hibernation: Registered nosave memory: [mem 0xfed1c000-0xfed3ffff]
PM: hibernation: Registered nosave memory: [mem 0xfed40000-0xfeffffff]
PM: hibernation: Registered nosave memory: [mem 0xff000000-0xffffffff]
[mem 0x90000000-0xfed1bfff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
setup_percpu: NR_CPUS:320 nr_cpumask_bits:16 nr_cpu_ids:16 nr_node_ids:1
percpu: Embedded 63 pages/cpu s221184 r8192 d28672 u262144
pcpu-alloc: s221184 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15 
Fallback order for Node 0: 0 
Built 1 zonelists, mobility grouping on.  Total pages: 8239149
Policy zone: Normal
Kernel command line: BOOT_IMAGE=boot/x86_64/vmlinuz archisobasedir=sysresccd archisolabel=RESCUE1001 iomem=relaxed copytoram initrd=boot/intel_ucode.img,boot/amd_ucode.img,boot/x86_64/sysresccd.img
Unknown kernel command line parameters "copytoram BOOT_IMAGE=boot/x86_64/vmlinuz archisobasedir=sysresccd archisolabel=RESCUE1001", will be passed to user space.
random: crng init done
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes, linear)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes, linear)
mem auto-init: stack:all(zero), heap alloc:on, heap free:off
software IO TLB: area num 16.
Memory: 32725524K/33480348K available (16391K kernel code, 2138K rwdata, 11072K rodata, 2148K init, 5356K bss, 754564K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 46437 entries in 182 pages
ftrace: allocated 182 pages with 5 groups
Dynamic Preempt: voluntary
rcu: Preemptible hierarchical RCU implementation.
rcu: 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=16.
	Trampoline variant of Tasks RCU enabled.
	Rude variant of Tasks RCU enabled.
	Tracing variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=16
NR_IRQS: 20736, nr_irqs: 960, preallocated irqs: 16
rcu: srcu_init: Setting srcu_struct sizes based on contention.
kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
Console: colour VGA+ 80x25
printk: console [tty0] enabled
ACPI: Core revision 20220331
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
APIC: Switch to symmetric I/O mode setup
DMAR: Host address width 46
DMAR: DRHD base: 0x000000fbffc000 flags: 0x1
DMAR: dmar0: reg_base_addr fbffc000 ver 1:0 cap d2078c106f0466 ecap f020de
DMAR: RMRR base: 0x0000007c659000 end: 0x0000007c667fff
DMAR: ATSR flags: 0x0
DMAR: RHSA base: 0x000000fbffc000 proximity domain: 0x0
DMAR-IR: IOAPIC id 0 under DRHD base  0xfbffc000 IOMMU 0
DMAR-IR: IOAPIC id 2 under DRHD base  0xfbffc000 IOMMU 0
DMAR-IR: HPET id 0 under DRHD base 0xfbffc000
DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
DMAR-IR: Enabled IRQ remapping in x2apic mode
x2apic enabled
Switched APIC routing to cluster x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2579d13670c, max_idle_ns: 440795224252 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 5201.43 BogoMIPS (lpj=8666290)
pid_max: default: 32768 minimum: 301
LSM: Security Framework initializing
landlock: Up and running.
Yama: becoming mindful.
LSM support for eBPF active
Mount-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 0, 4MB 0, 1GB 4
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Retpolines
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
Spectre V2 : Enabling Restricted Speculation for firmware calls
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Spectre V2 : User space: Mitigation: STIBP via prctl
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
MDS: Mitigation: Clear CPU buffers
MMIO Stale Data: Unknown: No mitigations
Freeing SMP alternatives memory: 40K
smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2650 v2 @ 2.60GHz (family: 0x6, model: 0x3e, stepping: 0x4)
cblist_init_generic: Setting adjustable number of callback queues.
cblist_init_generic: Setting shift to 4 and lim to 1.
cblist_init_generic: Setting shift to 4 and lim to 1.
cblist_init_generic: Setting shift to 4 and lim to 1.
Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Intel PMU driver.
... version:                3
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             00007fffffffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
Estimated ratio of average max frequency by base frequency (times 1024): 1220
rcu: Hierarchical SRCU implementation.
rcu: 	Max phase no-delay instances is 1000.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node  #0, CPUs:        #1
TSC synchronization [CPU#0 -> CPU#1]:
Measured 232088 cycles TSC warp between CPUs, turning off TSC clock.
tsc: Marking TSC unstable due to check_tsc_sync_source failed
  #2  #3  #4  #5  #6  #7  #8
MDS CPU bug present and SMT on, data leak possible. See  for more details.
  #9 #10 #11 #12 #13 #14 #15
smp: Brought up 1 node, 16 CPUs
smpboot: Max logical packages: 1
smpboot: Total of 16 processors activated (83229.90 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
ACPI: PM: Registering ACPI NVS region [mem 0x7bd4c000-0x7c03cfff] (3084288 bytes)
ACPI: PM: Registering ACPI NVS region [mem 0x7c7b5000-0x7cc82fff] (5038080 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
futex hash table entries: 4096 (order: 6, 262144 bytes, linear)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 00:00:39, date: 2005-01-01
NET: Registered PF_NETLINK/PF_ROUTE protocol family
DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1104537639.209:1): state=initialized audit_enabled=0 res=1
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
thermal_sys: Registered thermal governor 'power_allocator'
cpuidle: using governor ladder
cpuidle: using governor menu
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000)
PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820
PCI: Using configuration type 1 for base access
core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: 2 ACPI AML tables successfully acquired and loaded
ACPI: Interpreter enabled
ACPI: PM: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
HEST: Table parsing has been initialized.
GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
PCI: Ignoring E820 reservations for host bridge windows
ACPI: Enabled 7 GPEs in block 00 to 3F
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
acpi PNP0A08:00: _OSC: platform does not support [SHPCHotplug LTR DPC]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io  0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0x80000000-0xfbffffff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:0e00] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: [8086:0e02] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.1: [8086:0e03] type 01 class 0x060400
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:0e04] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [8086:0e08] type 01 class 0x060400
pci 0000:00:03.0: enabling Extended Tags
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:05.0: [8086:0e28] type 00 class 0x088000
pci 0000:00:05.2: [8086:0e2a] type 00 class 0x088000
pci 0000:00:05.4: [8086:0e2c] type 00 class 0x080020
pci 0000:00:05.4: reg 0x10: [mem 0xfb308000-0xfb308fff]
pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400
pci 0000:00:11.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xfb307000-0xfb3073ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:1d20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xfb300000-0xfb303fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1d10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:1d14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: [8086:1d16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xfb306000-0xfb3063ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1d02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io  0xf070-0xf077]
pci 0000:00:1f.2: reg 0x14: [io  0xf060-0xf063]
pci 0000:00:1f.2: reg 0x18: [io  0xf050-0xf057]
pci 0000:00:1f.2: reg 0x1c: [io  0xf040-0xf043]
pci 0000:00:1f.2: reg 0x20: [io  0xf020-0xf03f]
pci 0000:00:1f.2: reg 0x24: [mem 0xfb305000-0xfb3057ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1d22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfb304000-0xfb3040ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io  0xf000-0xf01f]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.1: PCI bridge to [bus 02]
pci 0000:03:00.0: [10de:128b] type 00 class 0x030000
pci 0000:03:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
pci 0000:03:00.0: reg 0x14: [mem 0xf0000000-0xf7ffffff 64bit pref]
pci 0000:03:00.0: reg 0x1c: [mem 0xf8000000-0xf9ffffff 64bit pref]
pci 0000:03:00.0: reg 0x24: [io  0xe000-0xe07f]
pci 0000:03:00.0: reg 0x30: [mem 0xfb000000-0xfb07ffff pref]
pci 0000:03:00.0: enabling Extended Tags
pci 0000:03:00.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:03:00.1: [10de:0e0f] type 00 class 0x040300
pci 0000:03:00.1: reg 0x10: [mem 0xfb080000-0xfb083fff]
pci 0000:03:00.1: enabling Extended Tags
pci 0000:00:02.0: PCI bridge to [bus 03]
pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:02.0:   bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:00:02.0:   bridge window [mem 0xf0000000-0xf9ffffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 04]
pci 0000:00:11.0: PCI bridge to [bus 05]
pci 0000:00:1c.0: PCI bridge to [bus 06]
pci 0000:07:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:07:00.0: reg 0x10: [io  0xd000-0xd0ff]
pci 0000:07:00.0: reg 0x18: [mem 0xfb204000-0xfb204fff 64bit]
pci 0000:07:00.0: reg 0x20: [mem 0xfb200000-0xfb203fff 64bit]
pci 0000:07:00.0: supports D1 D2
pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.2: PCI bridge to [bus 07]
pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1c.2:   bridge window [mem 0xfb200000-0xfb2fffff]
pci 0000:08:00.0: [1106:3483] type 00 class 0x0c0330
pci 0000:08:00.0: reg 0x10: [mem 0xfb100000-0xfb100fff 64bit]
pci 0000:08:00.0: PME# supported from D0 D3cold
pci 0000:00:1c.3: PCI bridge to [bus 08]
pci 0000:00:1c.3:   bridge window [mem 0xfb100000-0xfb1fffff]
pci_bus 0000:09: extended config space not accessible
pci 0000:00:1e.0: PCI bridge to [bus 09] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0000-0x03af window] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x03e0-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x03b0-0x03df window] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000dffff window] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x80000000-0xfbffffff window] (subtractive decode)
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff])
acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
acpi PNP0A03:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [bus ff]
pci 0000:ff:08.0: [8086:0e80] type 00 class 0x088000
pci 0000:ff:09.0: [8086:0e90] type 00 class 0x088000
pci 0000:ff:0a.0: [8086:0ec0] type 00 class 0x088000
pci 0000:ff:0a.1: [8086:0ec1] type 00 class 0x088000
pci 0000:ff:0a.2: [8086:0ec2] type 00 class 0x088000
pci 0000:ff:0a.3: [8086:0ec3] type 00 class 0x088000
pci 0000:ff:0b.0: [8086:0e1e] type 00 class 0x088000
pci 0000:ff:0b.3: [8086:0e1f] type 00 class 0x088000
pci 0000:ff:0c.0: [8086:0ee0] type 00 class 0x088000
pci 0000:ff:0c.1: [8086:0ee2] type 00 class 0x088000
pci 0000:ff:0c.2: [8086:0ee4] type 00 class 0x088000
pci 0000:ff:0c.3: [8086:0ee6] type 00 class 0x088000
pci 0000:ff:0d.0: [8086:0ee1] type 00 class 0x088000
pci 0000:ff:0d.1: [8086:0ee3] type 00 class 0x088000
pci 0000:ff:0d.2: [8086:0ee5] type 00 class 0x088000
pci 0000:ff:0d.3: [8086:0ee7] type 00 class 0x088000
pci 0000:ff:0e.0: [8086:0ea0] type 00 class 0x088000
pci 0000:ff:0e.1: [8086:0e30] type 00 class 0x110100
pci 0000:ff:0f.0: [8086:0ea8] type 00 class 0x088000
pci 0000:ff:0f.1: [8086:0e71] type 00 class 0x088000
pci 0000:ff:0f.2: [8086:0eaa] type 00 class 0x088000
pci 0000:ff:0f.3: [8086:0eab] type 00 class 0x088000
pci 0000:ff:0f.4: [8086:0eac] type 00 class 0x088000
pci 0000:ff:0f.5: [8086:0ead] type 00 class 0x088000
pci 0000:ff:10.0: [8086:0eb0] type 00 class 0x088000
pci 0000:ff:10.1: [8086:0eb1] type 00 class 0x088000
pci 0000:ff:10.2: [8086:0eb2] type 00 class 0x088000
pci 0000:ff:10.3: [8086:0eb3] type 00 class 0x088000
pci 0000:ff:10.4: [8086:0eb4] type 00 class 0x088000
pci 0000:ff:10.5: [8086:0eb5] type 00 class 0x088000
pci 0000:ff:10.6: [8086:0eb6] type 00 class 0x088000
pci 0000:ff:10.7: [8086:0eb7] type 00 class 0x088000
pci 0000:ff:13.0: [8086:0e1d] type 00 class 0x088000
pci 0000:ff:13.1: [8086:0e34] type 00 class 0x110100
pci 0000:ff:13.4: [8086:0e81] type 00 class 0x088000
pci 0000:ff:13.5: [8086:0e36] type 00 class 0x110100
pci 0000:ff:16.0: [8086:0ec8] type 00 class 0x088000
pci 0000:ff:16.1: [8086:0ec9] type 00 class 0x088000
pci 0000:ff:16.2: [8086:0eca] type 00 class 0x088000
ACPI: PCI: Interrupt link LNKA configured for IRQ 11
ACPI: PCI: Interrupt link LNKB configured for IRQ 10
ACPI: PCI: Interrupt link LNKC configured for IRQ 3
ACPI: PCI: Interrupt link LNKD configured for IRQ 11
ACPI: PCI: Interrupt link LNKE configured for IRQ 0
ACPI: PCI: Interrupt link LNKF configured for IRQ 0
ACPI: PCI: Interrupt link LNKG configured for IRQ 5
ACPI: PCI: Interrupt link LNKH configured for IRQ 7
iommu: Default domain type: Translated 
iommu: DMA domain TLB invalidation policy: lazy mode 
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
PTP clock support registered
EDAC MC: Ver: 3.0.0
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel:  unlabeled traffic allowed by default
mctp: management component transport protocol core
NET: Registered PF_MCTP protocol family
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009ac00-0x0009ffff]
e820: reserve RAM buffer [mem 0x7b80e000-0x7bffffff]
pci 0000:03:00.0: vgaarb: setting as boot VGA device
pci 0000:03:00.0: vgaarb: bridge control possible
pci 0000:03:00.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [mem 0xfc000000-0xfcffffff] has been reserved
system 00:00: [mem 0xfd000000-0xfdffffff] has been reserved
system 00:00: [mem 0xfe000000-0xfeafffff] has been reserved
system 00:00: [mem 0xfeb00000-0xfebfffff] has been reserved
system 00:00: [mem 0xfed00400-0xfed3ffff] could not be reserved
system 00:00: [mem 0xfed45000-0xfedfffff] has been reserved
system 00:01: [mem 0xfbffc000-0xfbffdfff] could not be reserved
system 00:02: [io  0x0a00-0x0a0f] has been reserved
system 00:02: [io  0x0a10-0x0a1f] has been reserved
system 00:02: [io  0x0a20-0x0a2f] has been reserved
pnp 00:03: [dma 0 disabled]
system 00:05: [io  0x04d0-0x04d1] has been reserved
system 00:06: [io  0x0400-0x0453] has been reserved
system 00:06: [io  0x0458-0x047f] has been reserved
system 00:06: [io  0x1180-0x119f] has been reserved
system 00:06: [io  0x0500-0x057f] has been reserved
system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:06: [mem 0xfec00000-0xfecfffff] could not be reserved
system 00:06: [mem 0xfed08000-0xfed08fff] has been reserved
system 00:06: [mem 0xff000000-0xffffffff] has been reserved
system 00:07: [io  0x0454-0x0457] has been reserved
pnp: PnP ACPI: found 8 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
NET: Registered PF_INET protocol family
IP idents hash table entries: 262144 (order: 9, 2097152 bytes, linear)
tcp_listen_portaddr_hash hash table entries: 16384 (order: 6, 262144 bytes, linear)
Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
TCP established hash table entries: 262144 (order: 9, 2097152 bytes, linear)
TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
TCP: Hash tables configured (established 262144 bind 65536)
MPTCP token hash table entries: 32768 (order: 7, 786432 bytes, linear)
UDP hash table entries: 16384 (order: 7, 524288 bytes, linear)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes, linear)
NET: Registered PF_UNIX/PF_LOCAL protocol family
NET: Registered PF_XDP protocol family
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:01.1: PCI bridge to [bus 02]
pci 0000:00:02.0: PCI bridge to [bus 03]
pci 0000:00:02.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:02.0:   bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:00:02.0:   bridge window [mem 0xf0000000-0xf9ffffff 64bit pref]
pci 0000:00:03.0: PCI bridge to [bus 04]
pci 0000:00:11.0: PCI bridge to [bus 05]
pci 0000:00:1c.0: PCI bridge to [bus 06]
pci 0000:00:1c.2: PCI bridge to [bus 07]
pci 0000:00:1c.2:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1c.2:   bridge window [mem 0xfb200000-0xfb2fffff]
pci 0000:00:1c.3: PCI bridge to [bus 08]
pci 0000:00:1c.3:   bridge window [mem 0xfb100000-0xfb1fffff]
pci 0000:00:1e.0: PCI bridge to [bus 09]
pci_bus 0000:00: resource 4 [io  0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io  0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io  0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io  0x0d00-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000dffff window]
pci_bus 0000:00: resource 9 [mem 0x80000000-0xfbffffff window]
pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
pci_bus 0000:03: resource 1 [mem 0xfa000000-0xfb0fffff]
pci_bus 0000:03: resource 2 [mem 0xf0000000-0xf9ffffff 64bit pref]
pci_bus 0000:07: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:07: resource 1 [mem 0xfb200000-0xfb2fffff]
pci_bus 0000:08: resource 1 [mem 0xfb100000-0xfb1fffff]
pci_bus 0000:09: resource 4 [io  0x0000-0x03af window]
pci_bus 0000:09: resource 5 [io  0x03e0-0x0cf7 window]
pci_bus 0000:09: resource 6 [io  0x03b0-0x03df window]
pci_bus 0000:09: resource 7 [io  0x0d00-0xffff window]
pci_bus 0000:09: resource 8 [mem 0x000a0000-0x000dffff window]
pci_bus 0000:09: resource 9 [mem 0x80000000-0xfbffffff window]
pci 0000:00:05.0: disabled boot interrupts on device [8086:0e28]
pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x750 took 19929 usecs
pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x750 took 19494 usecs
pci 0000:03:00.1: extending delay after power-on from D3hot to 20 msec
pci 0000:03:00.1: D0 power state depends on 0000:03:00.0
PCI: CLS 64 bytes, default 64
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0x0000000073a9d000-0x0000000077a9d000] (64MB)
Trying to unpack rootfs image as initramfs...
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=41 max_order=23 bucket_order=0
zbud: loaded
integrity: Platform Keyring initialized
integrity: Machine keyring initialized
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Freeing initrd memory: 62916K
alg: self-tests for CTR-KDF (hmac(sha256)) passed
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
pcieport 0000:00:01.0: PME: Signaling with IRQ 25
pcieport 0000:00:01.0: AER: enabled with IRQ 25
pcieport 0000:00:01.1: PME: Signaling with IRQ 26
pcieport 0000:00:01.1: AER: enabled with IRQ 26
pcieport 0000:00:02.0: PME: Signaling with IRQ 28
pcieport 0000:00:02.0: AER: enabled with IRQ 28
pcieport 0000:00:03.0: PME: Signaling with IRQ 30
pcieport 0000:00:03.0: AER: enabled with IRQ 30
pcieport 0000:00:11.0: PME: Signaling with IRQ 31
pcieport 0000:00:11.0: AER: enabled with IRQ 31
pcieport 0000:00:1c.0: PME: Signaling with IRQ 32
pcieport 0000:00:1c.2: PME: Signaling with IRQ 33
pcieport 0000:00:1c.3: PME: Signaling with IRQ 34
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
ACPI: \_SB_.SCK0.C000: Found 2 idle states
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: button: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: button: Power Button [PWRF]
ERST: Error Record Serialization Table (ERST) support is initialized.
pstore: Registered erst as persistent store backend
00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug.
ACPI: bus type drm_connector registered
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x8 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst 
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: DUMMY
ata2: DUMMY
ata3: DUMMY
ata4: SATA max UDMA/133 abar m2048@0xfb305000 port 0xfb305280 irq 35
ata5: DUMMY
ata6: DUMMY
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: irq 16, io mem 0xfb307000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 6.1.30-1-lts ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: irq 23, io mem 0xfb306000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 6.1.30-1-lts ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usbcore: registered new interface driver usbserial_generic
rtc_cmos 00:04: RTC can wake from S4
rtc_cmos 00:04: registered as rtc0
rtc_cmos 00:04: setting system clock to 2005-01-01T00:00:40 UTC (1104537640)
rtc_cmos 00:04: alarms up to one month, y3k, 114 bytes nvram
intel_pstate: Intel P-state driver initializing
ledtrig-cpu: registered to indicate activity on CPUs
hid: raw HID events driver (C) Jiri Kosina
drop_monitor: Initializing network drop monitor service
Initializing XFRM netlink socket
NET: Registered PF_INET6 protocol family
Segment Routing with IPv6
RPL Segment Routing with IPv6
In-situ OAM (IOAM) with IPv6
NET: Registered PF_PACKET protocol family
microcode: sig=0x306e4, pf=0x1, revision=0x42e
microcode: Microcode Update Driver: v2.2.
IPI shorthand broadcast: enabled
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 0cd463d174e2070d2d51ef62220aed00ebc7ff7f'
zswap: loaded using pool lz4/z3fold
Key type .fscrypt registered
Key type fscrypt-provisioning registered
pstore: Using crash dump compression: zstd
PM:   Magic number: 5:0:0
memory memory48: hash matches
RAS: Correctable Errors collector initialized.
Unstable clock detected, switching default tracing clock to "global"
               If you want to keep using the local clock, then add:
                 "trace_clock=local"
               on the kernel command line
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: new high-speed USB device number 2 using ehci-pci
ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata4.00: ATAPI: DRW-24D5MT, 1.00, max UDMA/133
ata4.00: configured for UDMA/133
scsi 3:0:0:0: CD-ROM            ASUS     DRW-24D5MT       1.00 PQ: 0 ANSI: 5
Freeing unused decrypted memory: 2036K
Freeing unused kernel image (initmem) memory: 2148K
Write protecting the kernel read-only data: 30720k
Freeing unused kernel image (text/rodata gap) memory: 2040K
Freeing unused kernel image (rodata/data gap) memory: 1216K
usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
x86/mm: Checked W+X mappings: passed, no W+X pages found.
rodata_test: all tests were successful
x86/mm: Checking user space page tables
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
  with arguments:
    /init
    copytoram
  with environment:
    HOME=/
    TERM=linux
    BOOT_IMAGE=boot/x86_64/vmlinuz
    archisobasedir=sysresccd
    archisolabel=RESCUE1001
usb 1-1.2: new full-speed USB device number 3 using ehci-pci
usb 1-1.2: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=24.11
usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.2: Product: USB Receiver
usb 1-1.2: Manufacturer: Logitech
fuse: init (API version 7.37)
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/0003:046D:C52B.0001/input/input2
xhci_hcd 0000:08:00.0: xHCI Host Controller
xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:08:00.0: hcc params 0x002841eb hci version 0x100 quirks 0x0000040000000890
xhci_hcd 0000:08:00.0: xHCI Host Controller
xhci_hcd 0000:08:00.0: new USB bus registered, assigned bus number 4
xhci_hcd 0000:08:00.0: Host supports USB 3.0 SuperSpeed
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 6.1.30-1-lts xhci-hcd
usb usb3: SerialNumber: 0000:08:00.0
cryptd: max_cpu_qlen set to 1000
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 1 port detected
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 6.1.30-1-lts xhci-hcd
usb usb4: SerialNumber: 0000:08:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
hid-generic 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1a.0-1.2/input0
input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:046D:C52B.0002/input/input3
input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:046D:C52B.0002/input/input4
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
r8169 0000:07:00.0 eth0: RTL8168h/8111h, 22:28:4d:01:0c:b6, XID 541, IRQ 37
r8169 0000:07:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/0003:046D:C52B.0002/input/input5
hid-generic 0003:046D:C52B.0002: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1.2/input1
sr 3:0:0:0: [sr0] scsi3-mmc drive: 48x/12x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
hid-generic 0003:046D:C52B.0003: hiddev97,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.0-1.2/input2
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usb 3-1: new high-speed USB device number 2 using xhci_hcd
nouveau 0000:03:00.0: vgaarb: deactivate vga console
Console: switching to colour dummy device 80x25
nouveau 0000:03:00.0: NVIDIA GK208B (b060b0b1)
usb 3-1: New USB device found, idVendor=2109, idProduct=3431, bcdDevice= 4.20
usb 3-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 3-1: Product: USB2.0 Hub
hub 3-1:1.0: USB hub found
hub 3-1:1.0: 4 ports detected
sr 3:0:0:0: Attached scsi CD-ROM sr0
nouveau 0000:03:00.0: bios: version 80.28.a6.00.22
nouveau 0000:03:00.0: fb: 2048 MiB DDR3
usb 4-2: new SuperSpeed USB device number 2 using xhci_hcd
usb 4-2: New USB device found, idVendor=0781, idProduct=5595, bcdDevice= 1.00
usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 4-2: Product:  SanDisk 3.2Gen1
usb 4-2: Manufacturer:  USB
usb 4-2: SerialNumber: 0101c2e7e2bd14c72e152b41e1118cee6bc6a150a15488581d529fc9438b4598acee000000000000000000002057697200164600955581076eaed724
usb-storage 4-2:1.0: USB Mass Storage device detected
scsi host6: usb-storage 4-2:1.0
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver uas
logitech-djreceiver 0003:046D:C52B.0003: hiddev96,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.0-1.2/input2
input: Logitech Wireless Device PID:404d Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.2/0003:046D:C52B.0003/0003:046D:404D.0004/input/input7
input: Logitech Wireless Device PID:404d Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.2/0003:046D:C52B.0003/0003:046D:404D.0004/input/input8
hid-generic 0003:046D:404D.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Wireless Device PID:404d] on usb-0000:00:1a.0-1.2/input2:1
scsi 6:0:0:0: Direct-Access      USB      SanDisk 3.2Gen1 1.00 PQ: 0 ANSI: 6
sd 6:0:0:0: [sda] 240328704 512-byte logical blocks: (123 GB/115 GiB)
sd 6:0:0:0: [sda] Write Protect is off
sd 6:0:0:0: [sda] Mode Sense: 43 00 00 00
sd 6:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2
sd 6:0:0:0: [sda] Attached SCSI removable disk
nouveau 0000:03:00.0: DRM: VRAM: 2048 MiB
nouveau 0000:03:00.0: DRM: GART: 1048576 MiB
nouveau 0000:03:00.0: DRM: TMDS table version 2.0
nouveau 0000:03:00.0: DRM: DCB version 4.0
nouveau 0000:03:00.0: DRM: DCB outp 00: 01000f02 00020030
nouveau 0000:03:00.0: DRM: DCB outp 01: 02011f62 00020010
nouveau 0000:03:00.0: DRM: DCB outp 02: 02022f10 00000000
nouveau 0000:03:00.0: DRM: DCB conn 00: 00001031
nouveau 0000:03:00.0: DRM: DCB conn 01: 00002161
nouveau 0000:03:00.0: DRM: DCB conn 02: 00000200
nouveau 0000:03:00.0: DRM: MM: using COPY for buffer copies
nouveau 0000:03:00.0: DRM: allocated 1920x1080 fb: 0x80000, bo 000000008fec799d
fbcon: nouveaudrmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
nouveau 0000:03:00.0: [drm] fb0: nouveaudrmfb frame buffer device
[drm] Initialized nouveau 1.3.1 20120801 for 0000:03:00.0 on minor 0
input: Logitech K400 Plus as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.2/0003:046D:C52B.0003/0003:046D:404D.0004/input/input12
logitech-hidpp-device 0003:046D:404D.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech K400 Plus] on usb-0000:00:1a.0-1.2/input2:1
Key type encrypted registered
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: [email protected]
ISO 9660 Extensions: RRIP_1991A
EXT4-fs (dm-1): INFO: recovery required on readonly filesystem
EXT4-fs (dm-1): write access will be enabled during recovery
EXT4-fs (dm-1): recovery complete
EXT4-fs (dm-1): mounted filesystem with ordered data mode. Quota mode: none.
EXT4-fs (dm-1): re-mounted. Quota mode: none.
loop: module loaded
loop0: detected capacity change from 0 to 1349680
squashfs: version 4.0 (2009/01/31) Phillip Lougher
overlayfs: "xino" feature enabled using 32 upper inode bits.
systemd[1]: System time before build time, advancing clock.
systemd[1]: systemd 253.4-1-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT -QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
systemd[1]: Detected architecture x86-64.
systemd[1]: Hostname set to .
systemd[1]: bpf-lsm: LSM BPF program attached
systemd[1]: Queued start job for default target Multi-User System.
systemd[1]: Created slice Slice /system/getty.
systemd[1]: Created slice Slice /system/modprobe.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target Local Encrypted Volumes.
systemd[1]: Reached target Local Integrity Protected Volumes.
systemd[1]: Reached target Path Units.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Reached target Slice Units.
systemd[1]: Reached target Swaps.
systemd[1]: Reached target Local Verity Protected Volumes.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Listening on Process Core Dump Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Mounting Temporary Directory /tmp...
systemd[1]: Starting Create List of Static Device Nodes...
systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Starting Load Kernel Module configfs...
systemd[1]: Starting Load Kernel Module dm_mod...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Starting Load Kernel Module fuse...
systemd[1]: Starting Load Kernel Module loop...
systemd[1]: Starting Journal Service...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/StubPcrKernelImage-4a67b082-0a4c-41cf-b6c7-440b29bb8c4f).
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting Coldplug All udev Devices...
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Mounted Kernel Trace File System.
systemd[1]: Mounted Temporary Directory /tmp.
systemd-journald[642]: Collecting audit messages is disabled.
systemd[1]: Finished Create List of Static Device Nodes.
systemd[1]: [email protected]: Deactivated successfully.
sr 3:0:0:0: Attached scsi generic sg0 type 5
sd 6:0:0:0: Attached scsi generic sg1 type 0
systemd[1]: Finished Load Kernel Module configfs.
systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
systemd[1]: Finished Load Kernel Module dm_mod.
systemd[1]: Started Journal Service.
systemd-journald[642]: Received client request to flush runtime journal.
r8169 0000:07:00.0 enp7s0: renamed from eth0
input: PC Speaker as /devices/platform/pcspkr/input/input13
mousedev: PS/2 mouse device common for all mice
i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
i2c i2c-12: 2/4 memory slots populated (from DMI)
iTCO_vendor_support: vendor-support=0
RAPL PMU: API unit is 2^-32 Joules, 2 fixed counters, 163840 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
RAPL PMU: hw unit of domain package 2^-16 Joules
iTCO_wdt iTCO_wdt.1.auto: Found a Patsburg TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0)
snd_hda_intel 0000:03:00.1: Disabling MSI
snd_hda_intel 0000:03:00.1: Handle vga_switcheroo audio client
snd_hda_intel 0000:03:00.1: bound 0000:03:00.0 (ops nv50_audio_component_bind_ops [nouveau])
input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:02.0/0000:03:00.1/sound/card1/input14
input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:02.0/0000:03:00.1/sound/card1/input15
input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:02.0/0000:03:00.1/sound/card1/input16
input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:02.0/0000:03:00.1/sound/card1/input17
snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC897: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D0:    inputs:
snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input19
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input20
input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input21
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input22
EDAC sbridge: Seeking for: PCI ID 8086:0ea0
EDAC sbridge: Seeking for: PCI ID 8086:0ea0
EDAC sbridge: Seeking for: PCI ID 8086:0e60
EDAC sbridge: Seeking for: PCI ID 8086:0ea8
EDAC sbridge: Seeking for: PCI ID 8086:0ea8
EDAC sbridge: Seeking for: PCI ID 8086:0e71
EDAC sbridge: Seeking for: PCI ID 8086:0e71
EDAC sbridge: Seeking for: PCI ID 8086:0eaa
EDAC sbridge: Seeking for: PCI ID 8086:0eaa
EDAC sbridge: Seeking for: PCI ID 8086:0eab
EDAC sbridge: Seeking for: PCI ID 8086:0eab
EDAC sbridge: Seeking for: PCI ID 8086:0eac
EDAC sbridge: Seeking for: PCI ID 8086:0eac
EDAC sbridge: Seeking for: PCI ID 8086:0ead
EDAC sbridge: Seeking for: PCI ID 8086:0ead
EDAC sbridge: Seeking for: PCI ID 8086:0e68
EDAC sbridge: Seeking for: PCI ID 8086:0e79
EDAC sbridge: Seeking for: PCI ID 8086:0e6a
EDAC sbridge: Seeking for: PCI ID 8086:0e6b
EDAC sbridge: Seeking for: PCI ID 8086:0e6c
EDAC sbridge: Seeking for: PCI ID 8086:0e6d
EDAC sbridge: Seeking for: PCI ID 8086:0eb8
EDAC sbridge: Seeking for: PCI ID 8086:0ebc
EDAC sbridge: Seeking for: PCI ID 8086:0ec8
EDAC sbridge: Seeking for: PCI ID 8086:0ec8
EDAC sbridge: Seeking for: PCI ID 8086:0ec9
EDAC sbridge: Seeking for: PCI ID 8086:0ec9
EDAC sbridge: Seeking for: PCI ID 8086:0eca
EDAC sbridge: Seeking for: PCI ID 8086:0eca
EDAC MC0: Giving out device to module sb_edac controller Ivy Bridge SrcID#0_Ha#0: DEV 0000:ff:0e.0 (INTERRUPT)
EDAC sbridge:  Ver: 1.1.2 
intel_rapl_common: Found RAPL domain package
intel_rapl_common: Found RAPL domain core
Generic FE-GE Realtek PHY r8169-0-700:00: attached PHY driver (mii_bus:phy_addr=r8169-0-700:00, irq=MAC)
r8169 0000:07:00.0 enp7s0: Link is Down
r8169 0000:07:00.0 enp7s0: Link is Up - 1Gbps/Full - flow control rx/tx
IPv6: ADDRCONF(NETDEV_CHANGE): enp7s0: link becomes ready
iptables-dropped: IN=enp7s0 OUT= MAC=22:28:4d:01:0c:b6:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:57bb:6f90:1d84:526e LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52 
iptables-dropped: IN=enp7s0 OUT= MAC=22:28:4d:01:0c:b6:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:57bb:6f90:1d84:526e LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52 
iptables-dropped: IN=enp7s0 OUT= MAC=22:28:4d:01:0c:b6:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:57bb:6f90:1d84:526e LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52 
iptables-dropped: IN=enp7s0 OUT= MAC=22:28:4d:01:0c:b6:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:57bb:6f90:1d84:526e LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52 
iptables-dropped: IN=enp7s0 OUT= MAC=22:28:4d:01:0c:b6:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:57bb:6f90:1d84:526e LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52 
iptables-dropped: IN=enp7s0 OUT= MAC=22:28:4d:01:0c:b6:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:57bb:6f90:1d84:526e LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52 
iptables-dropped: IN=enp7s0 OUT= MAC=22:28:4d:01:0c:b6:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:57bb:6f90:1d84:526e LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52 
iptables-dropped: IN=enp7s0 OUT= MAC=22:28:4d:01:0c:b6:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:57bb:6f90:1d84:526e LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52 
iptables-dropped: IN=enp7s0 OUT= MAC=22:28:4d:01:0c:b6:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:57bb:6f90:1d84:526e LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52 
systemd-journald[642]: Oldest entry in /run/log/journal/1569041b5758489c9a62d896d6d7dfee/system.journal is older than the configured file retention duration (1month), suggesting rotation.
systemd-journald[642]: /run/log/journal/1569041b5758489c9a62d896d6d7dfee/system.journal: Journal header limits reached or header out-of-date, rotating.
iptables-dropped: IN=enp7s0 OUT= MAC=22:28:4d:01:0c:b6:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:57bb:6f90:1d84:526e LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52 
iptables-dropped: IN=enp7s0 OUT= MAC=22:28:4d:01:0c:b6:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:57bb:6f90:1d84:526e LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52 
iptables-dropped: IN=enp7s0 OUT= MAC=22:28:4d:01:0c:b6:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:57bb:6f90:1d84:526e LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52 
iptables-dropped: IN=enp7s0 OUT= MAC=22:28:4d:01:0c:b6:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:57bb:6f90:1d84:526e LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52 
iptables-dropped: IN=enp7s0 OUT= MAC=22:28:4d:01:0c:b6:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:57bb:6f90:1d84:526e LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52 
logitech-hidpp-device 0003:046D:404D.0004: Can not get the protocol version.
iptables-dropped: IN=enp7s0 OUT= MAC=22:28:4d:01:0c:b6:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:57bb:6f90:1d84:526e LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52 
iptables-dropped: IN=enp7s0 OUT= MAC=22:28:4d:01:0c:b6:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:57bb:6f90:1d84:526e LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52 
iptables-dropped: IN=enp7s0 OUT= MAC=22:28:4d:01:0c:b6:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:57bb:6f90:1d84:526e LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52 
iptables-dropped: IN=enp7s0 OUT= MAC=22:28:4d:01:0c:b6:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:57bb:6f90:1d84:526e LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52 
iptables-dropped: IN=enp7s0 OUT= MAC=22:28:4d:01:0c:b6:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:57bb:6f90:1d84:526e LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52 
iptables-dropped: IN=enp7s0 OUT= MAC=22:28:4d:01:0c:b6:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:57bb:6f90:1d84:526e LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52 
iptables-dropped: IN=enp7s0 OUT= MAC=22:28:4d:01:0c:b6:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:57bb:6f90:1d84:526e LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52 
iptables-dropped: IN=enp7s0 OUT= MAC=22:28:4d:01:0c:b6:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:57bb:6f90:1d84:526e LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52 
iptables-dropped: IN=enp7s0 OUT= MAC=22:28:4d:01:0c:b6:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:57bb:6f90:1d84:526e LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52 
iptables-dropped: IN=enp7s0 OUT= MAC=22:28:4d:01:0c:b6:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:57bb:6f90:1d84:526e LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52 
iptables-dropped: IN=enp7s0 OUT= MAC=22:28:4d:01:0c:b6:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:57bb:6f90:1d84:526e LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52 
iptables-dropped: IN=enp7s0 OUT= MAC=22:28:4d:01:0c:b6:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:57bb:6f90:1d84:526e LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52 
iptables-dropped: IN=enp7s0 OUT= MAC=22:28:4d:01:0c:b6:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:57bb:6f90:1d84:526e LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52 
iptables-dropped: IN=enp7s0 OUT= MAC=22:28:4d:01:0c:b6:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:57bb:6f90:1d84:526e LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52 
iptables-dropped: IN=enp7s0 OUT= MAC=22:28:4d:01:0c:b6:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:57bb:6f90:1d84:526e LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52 
iptables-dropped: IN=enp7s0 OUT= MAC=22:28:4d:01:0c:b6:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:57bb:6f90:1d84:526e LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52 
iptables-dropped: IN=enp7s0 OUT= MAC=22:28:4d:01:0c:b6:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:57bb:6f90:1d84:526e LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52 
iptables-dropped: IN=enp7s0 OUT= MAC=22:28:4d:01:0c:b6:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:57bb:6f90:1d84:526e LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52 
iptables-dropped: IN=enp7s0 OUT= MAC=22:28:4d:01:0c:b6:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:57bb:6f90:1d84:526e LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52 
iptables-dropped: IN=enp7s0 OUT= MAC=22:28:4d:01:0c:b6:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:57bb:6f90:1d84:526e LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52 
iptables-dropped: IN=enp7s0 OUT= MAC=22:28:4d:01:0c:b6:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:57bb:6f90:1d84:526e LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52 
iptables-dropped: IN=enp7s0 OUT= MAC=22:28:4d:01:0c:b6:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:57bb:6f90:1d84:526e LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52 
iptables-dropped: IN=enp7s0 OUT= MAC=22:28:4d:01:0c:b6:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:57bb:6f90:1d84:526e LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52 
iptables-dropped: IN=enp7s0 OUT= MAC=22:28:4d:01:0c:b6:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:57bb:6f90:1d84:526e LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52 
iptables-dropped: IN=enp7s0 OUT= MAC=22:28:4d:01:0c:b6:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:57bb:6f90:1d84:526e LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52 
iptables-dropped: IN=enp7s0 OUT= MAC=22:28:4d:01:0c:b6:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:57bb:6f90:1d84:526e LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52 

Return To Intel Xeon E5-2650 v2 System Information